Are your Toilet Repair services available in New Braunfels?

Yes, Masters Plumbing Service provides round-the-clock Toilet Repair services directly in New Braunfels, TX.

How much does emergency service cost in New Braunfels?

We offer upfront, transparent pricing with no hidden fees for all service calls in New Braunfels.

🚽 Running · Rocking · Clogged · Won't Flush

Professional Toilet Repair in New Braunfels, TX by Certified Plumbers

Name: Masters Plumbing Service
Telephone: +1-855-718-1500
Price range: $$
Rating: 4.9

Toilets fail in specific, diagnosable ways. The running sound after a flush, the phantom flush that cycles with no one in the bathroom, the wobbly seat, the bowl that won't clear with one flush — each one points to a specific component. Our techs in New Braunfels diagnose the actual cause and fix the specific part that failed.

📞 Call +1-855-718-1500 — Same-Day Service

Fill Valves & Flappers Wax Ring Replacement Clog Clearing & Auger Full Toilet Replacement

Licensed Toilet Repair service in New Braunfels, TX - Masters Plumbing Service

Why Call a Plumber for Toilet Work

4 Reasons Professional Toilet Repair Beats DIY in New Braunfels

A rocking toilet that's dismissed as a loose bolt and tightened without replacing the wax ring will continue letting sewer gas into the bathroom floor cavity. The right diagnosis matters.

🔎

Accurate Component Diagnosis

Phantom flushing (spontaneous refill with no flush) almost always indicates a flapper that no longer seals — a 10-minute repair. But sometimes it's a hairline crack in the overflow tube that keeps the water level from holding. We check both.

📦

Parts On the Truck

For toilets where the flush valve seat is chipped or the porcelain tank has cracked, we also carry compact replacement toilet units in standard rough-in dimensions.

💧

Wax Ring Work Done Right

A common mistake is resetting a toilet over a partial old wax ring or onto a damaged flange. We clean and inspect the flange, note any damage that needs addressing, and install the correct ring profile before reset. The toilet should not rock at all when we leave.

📋

Flat-Rate Pricing, No Hourly Surprise

We don't upsell a toilet replacement when the existing toilet is functional and the problem is a repairable component. Honest diagnosis produces honest recommendations.

What We Repair

Toilet Repair — All Makes, All Symptoms

From a constantly running tank to a toilet that's been loose on the floor for years, here's exactly what our toilet techs address in New Braunfels, TX.

Running Toilet

Fill Valve & Flapper Replacement

A running toilet is almost always caused by one of two things: a flapper that no longer seats fully against the flush valve (allowing water to trickle from tank to bowl), or a fill valve that won't shut off at the target water level. We dye-test to confirm the flapper seal, check fill valve shutoff behavior, and replace whichever component — or both — is responsible.

Wax Ring

Toilet Reset & Wax Ring Replacement

If the flange is damaged — cracked porcelain collar, corroded cast iron, or a flange sitting below finished floor height — we repair or shim the flange before wax ring installation. A wax ring on a damaged flange won't hold long-term.

Clogs

Toilet Clog Clearing

A toilet that won't clear with a plunger has either a tight clog in the trap or a blockage in the drain arm beyond the trap. We use a closet auger — a specialized toilet snake with a protective rubber boot — to reach through the trap and break or retrieve the obstruction without scratching the porcelain bowl.

Flush Valve

Flush Valve & Flapper Seat Repair

We can in many cases sand and polish a mildly damaged flush valve seat to restore the seal. When the seat is cracked or too severely scaled, we replace the flush valve assembly — either with a manufacturer repair kit or a universal replacement valve.

Tank Hardware

Tank-to-Bowl Gasket & Bolt Replacement

The bolts and rubber gasket connecting the tank to the bowl can deteriorate over years of service, leading to slow leaks at the tank base or a tank that shifts side to side. We drain and remove the tank, replace the spud washer (tank-to-bowl gasket), install new brass bolts with neoprene washers, and reseat the tank with correct torque to avoid cracking the porcelain.

Replacement

Full Toilet Replacement

We handle the full process: shut water, pull old toilet (including wax ring and flange inspection), set the new unit, connect supply, and verify flush performance and seal before leaving.

📞 Call +1-855-718-1500 — Fix It Today

Our Process

From Symptom to Fixed Toilet in 4 Steps

We don't replace everything and hope one part was the issue. A short diagnostic step tells us exactly which component failed — and we fix that one.

Describe the Symptom When You Call

We ask whether you have a gravity-feed toilet (standard) or a pressure-assist model, which affects which parts we bring.

Component-Level Diagnosis

Dye test for flapper seal, time the fill cycle, check the fill valve shutoff height, observe the flush cycle, check for base movement, and examine the supply line and tank hardware. A running toilet is diagnosed in under 5 minutes this way — no guessing.

Flat-Rate Quote Before Any Work

If the diagnosis reveals a more involved repair than initially expected (damaged flange, cracked tank), we explain it before proceeding and re-quote accordingly.

Repair & Verified Performance Test

Approved repairs execute immediately. After completion, we run five flush cycles to confirm the repair holds — silent tank refill, no base movement, clear bowl, no water at the base.

Customer Reviews

What New Braunfels Homeowners Say About Our Toilet Repairs

★★★★★

Master bath toilet had been running intermittently for months — I kept jiggling the handle. Masters Plumbing Service's tech diagnosed a deteriorated flapper seat and an aging fill valve that wasn't shutting off reliably. Replaced both in about 35 minutes. The toilet is completely silent now. The tech also found that my water pressure was running at 95 PSI — well above the 80 PSI max recommended — and adjusted the pressure regulator, which was stressing the fill valve in the first place. That kind of thorough thinking is why I called a plumber rather than just replacing parts myself.

— H. Nakamura, New Braunfels

★★★★★

My kids flushed something that I have no interest in describing, and the toilet wasn't clearing. The tech used a closet auger and retrieved the obstruction without damaging the porcelain. Fast, professional, zero judgment. Exactly what I needed.

— W. Chen, New Braunfels, TX

★★★★★

Water pooling at the toilet base had me convinced it was the wax ring. Tech traced the water to a corroded tank bolt — water was running down the outside of the bowl and pooling at the base without any leak at the floor seal. A 25-minute repair, not the toilet reset I was dreading.

— A. Williamson, New Braunfels, TX

Trusted Toilet Repair service in New Braunfels, TX - Masters Plumbing Service

Common Questions

Toilet Questions We Answer Every Day in New Braunfels

A flapper that doesn't seal fully typically wastes 26–200 gallons per day depending on how badly it fails to seat. At average residential water rates, that's $10–$80 per month per toilet. A fill valve that won't shut off can run even more. A $15–$40 repair pays for itself in the first billing cycle in most cases.

The two most common causes: loose closet bolts (the bolt-nut hardware holding the toilet base to the floor flange) or a deteriorated wax ring that no longer holds the toilet firmly against the floor seal. Loose bolts can be tightened — but only if the toilet is truly seated correctly, which requires checking the floor around the flange.

Replacement makes sense when: the toilet tank or bowl is cracked (not repairable); the flush mechanism can't be rebuilt with available parts (some discontinued European-style units); or the toilet was manufactured before 1994 and uses 3.5–5 gallons per flush — modern 1.28 GPF toilets save significant water costs over time.

Frequent clogs on a toilet that's otherwise functioning normally usually come from one of three sources: flushing items that shouldn't be flushed (wipes, cotton products, feminine hygiene products — even "flushable" wipes don't disperse like toilet paper), a partial blockage deeper in the drain line that makes the fixture slow-to-clear, or a low-flow toilet that doesn't have sufficient flush volume to clear the trap and drain arm reliably.

We trace the water source before recommending a toilet pull. A small amount of food dye in the tank, combined with a dry towel at the base and a few flush cycles, tells us very quickly whether the water is coming from the flush or from the tank fittings.

Fill valve or flapper replacement: 20–35 minutes. Tank hardware replacement: 30–50 minutes. Wax ring replacement (pull and reset): 60–90 minutes including inspection and testing. Clog clearing with a closet auger: 15–30 minutes. Full toilet replacement: 90–120 minutes including removal, flange inspection, new installation, and testing.

Professional Toilet Repair in New Braunfels, TX by Certified Plumbers